TRAINING CONDITION MONITORING OF POWER SYSTEM EQUIPMENT

 

COURSE DESCRIPTION

Faced with increased demands and growing competition, many utilities and industries are seeking to maximize the value of their existing assets by leveraging new technologies to optimize Operations and Maintenance activities. One of the most successful maintenance strategies is a conditioned-based approach which utilizes data collected from periodic inspections, testing and predictive maintenance technologies to determine the optimum maintenance requirements.
Contrary to the traditional time-based maintenance approach, Condition-based Maintenance is a process, which utilizes monitoring and diagnostic data to drive the maintenance decision process

objective:

  • Understand typical failure modes associated with Cables, Switchgears and Transformers.
  • Understand typically used on- and off- line diagnostic tests for condition monitoring of Cables, Switchgears and Transformers.
  • Understand the interrelationships of various on- and off- line diagnostic tests.
  • Understand the interpretation of test results.

At the end of this course, the electrical power engineers will be equipped with a better understanding of what to do, when to do it and how to interpret the results from on- and off- line diagnostic tests on Cables, Switchgears and Transformers. In effect, utilities and industries may avoid expensive failures and unscheduled outages, and most importantly, personal injury.

PARTICIPANT

This course is specially designed for Engineers and Technologists dealing with Operation, Maintenance & Testing of Switchgears, Cables and Power Transformers.

COURSE OUTLINE

 

Cable Diagnostics
 SUBTOPICS

  • Brief overview of types of cables and its accessories.
  • Failure modes of cables and its accessories.
  • Destructive and off-line tests – HVDC, HVAC, VLF & OSW.
  • Non-destructive and off-line tests – PD mapping.
  • Non-destructive and off-line tests -RVM and Dielectric Spectroscopy.
  • Non-destructive and on-line tests- HFCT, Ultrasonic.
  • Case Study Lecture, Discussions & Exercise Power Point

Switchgear Diagnostics
SUBTOPICS

  • Brief overview of switchgear construction – VCB & SF6.
  • Failure modes of switchgear.
  • Hipot test.
  • Contact resistance test.
  • Insulation resistance test.
  • Power factor/ Tan Delta test.
  • Timing test.
  • On-line tests – Partial Discharge & Thermography.
  • Case Study

Transformer Diagnostics
 SUBTOPICS

  • Brief overview of transformer construction
  • Brief overview on oil and paper insulation degradation
  • Failure modes of transformer and OLTC.
  • OLTC monitoring through motor current signature analysis
  • Dissolved Gas Analysis.
  • Furan Analysis.
  • Degree of Polymerisation test.
  • Case Study Lecture, Discussions & Exercise Power Point
  • Partial Discharge Analysis – Acoustic and HFCT.
  • Off-line tests – PI, Winding resistance, Turns ratio.
  • Case Study
  • Return Voltage Measurement
  • Frequency Response Analysis
  • Case Study

FACILITIES

ü  Certificate, Quality Training Kit (Pencil case: Erase, Bolpoint, Pencil, Tipe X, Stabillo, Flash Disk 8 GB.

ü  Bag (Public Training)

ü  Training Material (Hand Out & Soft Copy)

ü  Convenient training facilities in stars hotel (Public Training)

ü  Lunch 1 and Coffee Break 2 / Day (Public Training)

ü  Souvenir.

ü  Gratis antar Jemput dari Bandara/Stasiun ( Khusus Yogyakarta )

 

VENUE & COST TRAINING

Yogyakarta (Prime Plaza Hotel/Akan dikonfirmasi kemudian)

·         Biaya pelatihan sebesar Rp. 7.500.000,- / Peserta (Belum termasuk Akomodasi)

  • Apabila perusahaan / Instansi mengirimkan minimal 3 peserta, akan mendapatkan potongan biaya training menjadi Rp. 6.500.000,-  / Orang (Belum termasuk Akomodasi)
  • Apabila dalam perusahaan / Instansi mengirimkan minimal 5 peserta, akan mendapatkan potongan biaya training menjadi Rp. 5.500.000,-  / peserta (Belum termasuk Akomodasi)

TRAINING METHOD

  • Presentation
  • Discussion
  • Case Study
  • Evaluation


Referensi Training Terkait :


Catatan :

 

Pelatihan ini dapat disesuaikan dengan kebutuhan perusahaan Anda dan bisa diselenggarakan dalam bentuk Online Training maupun In-House Training. Untuk permintaan Online Training maupun In-House Training dengan jenis topik lainnya, silahkan mengirimkan ke alamat email atau menghubungi kontak person yang tercantum di website kami.

—————————————————————————————-

Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan menghubungi kontak person kami atau mengirimkan ke alamat email yang tercantum.

—————————————————————————————-

Bila dalam jadwal pelatihan tidak ada tanggal dan waktu yang tercantum atau jadwal pelatihan sudah kadaluarsa, mohon tanyakan kepada kami untuk jadwal terbarunya.

—————————————————————————————-

Peserta bisa mengajukan tanggal Pelatihan / Training selain yang tertera pada silabus penawaran.

—————————————————————————————-

 

Permintaan Brosur penawaran Training ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

 

Kontak Kami

 

Pusat Training Indonesia dan Pelatihan Bersertifikat - BMG TRAINING

 

Email : info@bmgtraining.co.id

 

Telp : (0274) 225 8012

CP 1 : +62813 9200 7100

 

Tags: